On-Site Hydraulic Repair Across the UAE, 24 Hours a Day
When a machine cannot be moved, ASAT sends hydraulic technicians to your site anywhere in the UAE, 24 hours a day. They test pressure and flow, find out whether the pump, valve or cylinder has failed, fix what can be fixed on site, and remove the rest for workshop repair in Sharjah, then come back to refit and commission it.
When you need on-site hydraulic repair
- The machine is too big or too far to transport.
- A production line, crane or vessel is stopped and every hour costs money.
- You need to know which component failed before anything is removed.
- A hose, fitting or accessible seal has failed and can be replaced in place.
Field troubleshooting, diagnostic pressure checks & component removal
When heavy construction machinery, industrial factory plants, or marine vessels cannot be transported to our workshop, ASAT deploys experienced hydraulic technicians directly to your site. We conduct system troubleshooting, operational pressure testing, leak inspections, and component removal and reinstallation across job sites, yards, and ports in all 7 Emirates.
- Field technicians dispatched across all 7 UAE Emirates
- System-level pressure troubleshooting and fault isolation
- Safe heavy component uncoupling, workshop transfer, and site commissioning
What our field technicians do on site
- 1.Deployment & Initial Review: Technical dispatch to your site equipped with diagnostic pressure gauges and essential tooling.
- 2.Circuit Pressure Diagnostics: Assessing main relief pressures, pilot circuits, pump flow symptoms, and actuator movements.
- 3.Defect Isolation: Identifying whether faults originate from external seal leaks, internal bypass, or valve failure.
- 4.Component Rigging & Removal: Safely uncoupling and rigging heavy cylinders or pumps for transportation to our workshop.
- 5.Reinstallation & Commissioning: Refitting overhauled components, bleeding air from hydraulic lines, and verifying operation under load.
Where our technicians work
- Heavy construction & earthmoving machines on active sites
- Stationary industrial presses, injection molders & scrap balers
- Marine deck cranes, winches & vessel steering gear at shipyards
- Quarry aggregate crushers, screening plants & conveyor drives
- Logistics port material handlers, reach stackers & forklifts
Areas we cover
Dubai including Jebel Ali, Sharjah, Abu Dhabi including Mussafah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah.
What happens after you call
- 1Call or WhatsAppTell us the machine model, what has failed and where the machine is.
- 2Phone triageOur engineers confirm the likely fault and whether a field visit is needed.
- 3Field team or workshopA mobile team travels to site with diagnostic equipment, or the component is collected for workshop repair.
Requirements are reviewed within 30–60 minutes, follow-up comes within 1–2 hours, and we dispatch the same day.
Turnaround
On-site diagnostics: same day on site, 1–2 days turnaround, pressure and flow tested under load.
What to tell us when you call
Machine make and model, what stopped working, any warning signs before it failed, the site location, and any site access or permit rules.
On-site hydraulic repair FAQs
Do you offer 24/7 on-site hydraulic repair?
- Yes. ASAT is open 24 hours, so you can call +971 58 958 4232 for a breakdown at any time, any day.
How quickly can a technician reach my site?
- It depends on distance and the time of the call. We aim to dispatch the same day across Sharjah, Dubai and Ajman.
Can you fix it on site or must it go to the workshop?
- Hoses, fittings, accessible seals and settings can usually be done on site. Full overhauls, machining and bench tests happen in the Sharjah workshop.
Do your technicians work on marine and port equipment?
- Yes: deck cranes, winches, steering gear and port handlers.
Start with a quote
Send the machine details. We quote after inspection, before any work starts. Open 24 hours.